5
(2)

The first step is about to know what version do you have on you RNS NAVI VW, and this is possible by long pushing the SETUP button:


Now go to versions:

If you are on any 02xx firmware but NOT on 0235 (like 0212, 0227 etc) you should use this disc:

“RNS310-02xx to 0351.img”

Burn the disc, put it in to the drive and follow the instructions on screen, the update will take about 30-60 minutes depending on your current version
The device will reboot several times during the process.

When the update is done, press SETUP again to make sure that you are on 0351.

(Optional) If you want to update to from 0351 0357 you can use this disc:

“Official Volkswagen 0335 or 0235.iso”

IMPORTANT! Only update to 0357 if you where on 02xx when you started this process, but NOT on 0235

!WARNING! , if you have updated from 0235 to 0351 using “RNS310 – 0235 to 0351.iso“, do NOT update to 0357 afterwards!, you may end up with a bricked device !WARNING!

If you are on 0235, please use this iso to update to 0351:
RNS310 – 0235 to 0351.iso

!WARNING! , if you have updated from 0235 to 0351 using “RNS310 – 0235 to 0351.iso“, do NOT update to 0357 afterwards!, you may end up with a bricked device !WARNING!

If you already are on a 03xx firmware when you start, use the “Official Volkswagen 0335 or 0235.iso” to update to 0357

Now because I have 0357, it’s time to update only for unblocked version so:

I take the software Version Unblocked from here: 02xx unlock disc2 + 03xx_unlock. burn at the slowest speed possible 4x a SONY CDR @700mb with 4x and it was readable perfectly.

The software of writing disks is CDBURNERXP that works perfectly


Now you can do the update only with the engine or ignition ON all the time of update ~ aprox 30 minutes.

Anyway the first step is to confirm the 1st installation:

SOFTWARE UPDATE UNBLOCK VERSION

Then wait for completing the update:

RNS 310 SOFTWARE UPDATE VERSION

Click on exit:

RNS 310 SOFTWARE UPDATE VERSION

Atention,do not let the card with the maps inside  because you will get this error↓ after first update:

UPDATE ERROR DUE TO CARD INSERTED

If you are in this point you need to restart the navi by long pushing power + eject buttons and reinsert after this image:

RNS 310 SOFTWARE UPDATE VERSION SUCCESFULLY

Then after everything is ok is getting back the cd and start the update again if is necesary or continue like bellow:

Wait until 100% and after restart your medianav is coming.

If you puting again and show like this:

RNS 310 SOFTWARE ALREADY UPDATED VERSION

it means that is ok 😉

Now it’s time for the map update EAST or VEST (or BOTH ) and you can do it very fast by putting all the maps 2020 from here at a USB ~16GB should be enough, put inside and start the NAV.

The MAPS for this version are available here:

✅DOWNLOAD file maps after the beer donation 🍻

If you don’t succeed with the normal card you will need to buy a special card with CID changer posibility like bellow mentioned:

This image has an empty alt attribute; its file name is image-122.jpg
Check very caarefully the label for the CID interchangeabile CARD 32GB x 64GB

Main Features:
· High-performance SD memory card for tablets, cameras and etc.
· Read speeds up to 48MB/s for quick file transfer from card to computer.
· Write speeds twice as fast as conventional micro SD cards.
· UHS-1 enabled for recording Full HD video.
· 16GB storage capacity holds thousands of photos or MP3s.
· Waterproof, temperature proof, magnetic proof, and X-ray proof.

The main list of best devices is here:

  • Samsung Evo/Evo+ manufactured prior to summer 2016
  • Samsung Evo MB-SP32D/EU
  • Samsung Evo+ MB-SC32D/EU
  • Samsung Essential MB-MSBGA/EU 16GB
  • Samsung Essential MB-MSAGB 16GB
  • Samsung Evo+ MB-MC32DA/EU
  • Samsung Essential 16 GB (MB-MSBGA/EU)
  • Samsung Essential 32 GB (MB-MSBGA/EU)
  • Samsung EVO 32 GB (MB-MP32DA)
  • Samsung EVO 64 GB (MB-MP64DA)
  • Samsung EVO+ 32 GB (MB-MC32DA)
  • Samsung EVO+ 64 GB (MB-MC64DA)
  • Samsung EVO+ 128 GB (MB-MC128DA)
  • Samsung PRO 32 GB (MB-MG32EA)
  • Samsung PRO 64 GB (MB-MG64EA)
  • Samsung PRO+ 32 GB (MB-MD32D)
  • Samsung PRO+ 64 GB (MB-MD64D)
  • Samsung 16GB SDHC Class 10 “U1” MB-SPAGC MADE IN KOREA MBSPAGVDDACA-XH
  • Samsung 32GB MicroSDHC Class 10 “U1” MB-MPBGC MADE IN KOREA MBMPBGVEQAFA-XH
  • Lexar 8GB Class 4 Type MMAGR08GUDCA-DB made in Taiwan
  • Transcend MicroSDHC 8GB TS8GUSDHC6

that can be founded for buying here: https://www.ebay.com or here : https://www.newegg.com

Software can be used:

This image has an empty alt attribute; its file name is image-123.jpg
SMI FACTORY DRIVER UPDATE

Keep appreciate my projects and I will come ever with something new, I promise 😉

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 2

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.