SUPERMOD MN1 & MN2 [VIDEO PLAYER, TTCMD,IGO,TASKMANAGER]

Applies to both MediaNav Standard and MediaNav Evolution. I translated in 2 languages, updated few times and now finally arrived at version 4.0 where I increased the compatibility for more versions but also with skins.

MediaNav Standard
Download from down the Super Mod for firmware versions from 4.0.3 to 4.1.0 (at least you must have 4.0.3 installed )
Download Super Mod for firmware versions 4.0.3 to 4.1.0 ( at least you must be installed 4.0.3 )

Evolution MediaNav
Download from the down the Super Mod Evolution for the firmware versions from 6.0.3 to 9.1.3 ( AT Least you a must have 6.0.3 installed )
Download the version the Super Mod Evolution firmware from 6.0.3 to 9.1.3 ( at at least you should have 6.0.3 installed )

Unzip the. rar file and the resulting file called ” upgrade.lgu “, put it in a USB formatted in FAT32, plus photo folders, IGO8, 7Ways, Supermodd and video clips.
I recommend making on the USB stick also a Backup folder and another New Maps .
In the New Maps folder, put what you want to add for navigation, for example (maps, poi, licenses, speedcams, userdata if you have, tmc, etc.).
In the Backup folder, I recommend that you save after getting into the system for any event what you can from MediaNav, if you have not taken one step before. However, the minimum to be saved is the Storage Card and Storage Card4folders that are very important. Unlike the previous step in Storage Card4, now we’ll also find the Supermodd applications installed when we enter.
Once again the recommendation is to create a fingerprint as the original system before making any changes and keep it saved on your computer, if you have not already done so in the previous step. So if you want later to update firmware via Naviextras you already have a fingerprint.

Unzip it. RAR file and the resulting file, called “ upgrade.lgu ”, put it on a USB drive formatted in FAT32, plus folders with photos, IGO8, 7Ways, Supermodd and video clips.
I recommend making a backup folder and another New Maps on the flash drive .
In the New Maps folder, specify what you want to add, for example, for navigation (maps, access points, licenses, speed cameras, user data, if any, tmc, etc.).
In the “Backup” folder, I recommend that after logging in for any event, save what you can from MediaNav if you have not taken a single step earlier. However, the minimum you need to save is the very important Storage Card and Storage Card4 folders . Unlike the previous step in Storage Card4, now we will also find Supermodd applications installed at login.
Once again, we recommend that you create the fingerprint as the source system before making any changes and save it on your computer if you have not already done so in the previous step. So if you want to update firmware later through Naviextras, you already have a fingerprint.

Start the engine in the event that the battery was discharged, put the USB stick and accept the installation of Super Mod , once accepted the installation, start installing some lines and restart MediaNav (do not remove the USB), after restarting the installation continues until it prompts you to install again and the sound appears, with click on left arrow live the installation. You still have to wait the initialization which is ending with a new restart. You can now start the Super Mod by clicking on the top phone icon that appears next to watch, or click on date. If you have DBoot installed there are few more options, the Super Mod starts also sliding the finger horizontally on screen and sliding finger vertically the video player starts.

Start the engine if the battery runs out, insert a USB flash drive and accept the installation of Super Mod, after accepting the installation, start the installation of some lines and restart MediaNav (do not remove the USB), after restarting the installation, it will continue until it prompts you to install again and a sound will appear by pressing the left arrow button to start the installation. You still need to wait for the initialization, which ends with a new restart. Now you can start the supermode by clicking on the phone icon on top, which appears next to the clock, or click on the date. If you have DBoot installed, there are several more options, Super Mod also starts to slide your finger horizontally on the screen and slide your finger vertically, the video player starts.

Once installed, Super Mod, you can with Total Commander on USB delete the file Upgrade.lgu, so it will not ask to install it again every time you read the USB.
For update maps, from Super Mod first need to Stop GPS and then with Total Commander update files you need. At end need to Start GPS or make a restart of unit.

After installing Super Mod, you can use the Total Commander on USB to delete the Upgrade.lgu file, so it will not ask you to install it every time you read USB.
To update maps, from Super Mod you first need to stop GPS , and then use Total Commander to update the files you need. In the end you needstart GPS or reboot the device.

What I liked mostly was that it was desirable to uninstall the Super Mod to go to a revision with the car, it could be easy and the screen returned to normal without any other icons.
From the Super Mod application, the screen slides up, new icons appear, and click on Uninstall button and accept it. A 15s counter appears and wait finish. Finally, the Super Mod is uninstalled and after a short time it’s recommended to stop MediaNav for about 2 minutes and restart to allow all additional services to be stopped.

In order to proceed with further development with the car, this could be easy, and the screen returned to normal without any other icons.
In the Super Mod application, the screen moves up, new icons appear, click the “ Uninstall” button and accept it. A 15 s counter appears and wait for the finish. Finally, the supermode is removed, and after a while it is recommended to stop MediaNav for about 2 minutes and restart so that all additional services are stopped.