SOFTWARE INSTALL STEPS:
ACTIVATION BY DMICOM + WINCE 6
STEP 1 : Learn of how to get to win CE6 from here:
Or by DBOOT VERSION from bellow:
MEDIANAV 4.1.0 DBOOT for accesing the WinCE by USB
Dboot v2 for 4.1.0
Bootloader for 4.1.0
MEDIANAV MNI BEST DJEMAN UNIVERSAL TOOL for accesing the WinCE by USB
Step 3 : Extract Zip & Copy the upgrade.lgu from dboot 1.4 folder
Step 3 : Insert the USB into MediaNav
Step 4 : Press Upgrade to Dboot MN1
[ MediaNav will automatically restart, Don’t unplug the USB ]
Step 5: Upgrade will continue after restart
Step 6 : Power Off & On the MediaNav Using Car Key (after update)
Step 7 : Once Dboot MN1 displayed in bottom left of Medianav , Touch the logo with your finger & Move from left to right
Step 8 : Press Ok in the screen, to enter Windows CE 6.0
Step 9 : Touch Start, Program & Select USB PHY On
Step 10 : Extract dmicom_beta_1 Zip file and copy the folder into a formatted USB
Step 11 : Connect the USB into MediaNav
Step 12 : Open My Device , Open Drive MD , Open dmicom_beta_1/bin/dmicom.exe
[ Micom Config will open ]
Step 13 : Choose Environment , Choose Fitted option in Rear view cam & Rear loudspeakers
Step 14 : Touch Write ECU config to register the setting
Step 15 : Choose Rearview Camera option
Step 16 : Choose Guideline for x87 in vehicle type for RVC, then Write Guideline
Step 17 : Change RVC Display tempo.time (last option) to 500 [BS= Backspace],
Then Write Tempo.time
by following this article:
Step 18: After all above Steps, Press Enregister
[MediaNav will restart automatically]
Completed! Now you will be able so see this on your MEDIANAV MN1
VIDEO TUTORIAL FOR ACTIVATION AVAILABLE HERE: Activate Rear camera view and Rear Speaker in MediaNav-Kwid 4.0.6-Full with guide – YouTube
VISUAL AREA VIEW INSTALLATION packs:
NTSC-M mode – A version that automatically adapts to the release video stream NTSC version of the camera – A version that automatically adapts to the camera output video stream in PAL version There are 3 versions but it’s for compatibility with all cameras, if it works at home there’s no reason to try another one.
It doesn’t improve the quality it just allows you to have an image.
It’s up to you to choose the mod you like or/and the one you need Installation by lgu.
Original camera view for version 4.0.6, 6.0.3.MD or 7.0.5.MD Yip, A capture of the original view:
FOR MN2 5.1.x – 9.1.x VERSIONS are available here:
PHISICALLY CAMERA INSTALLATION
Based on the schematics from previous article:
We can take a look on the pin connections and where the wires should goes:
SOME EXTRA TIPS:
A sample video about it can be find here:
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?