Navigate

How to use Micom Manager MediaNav Evolution v4.x[MN1]+v9.x[MN2]+v1.0.13[MN3]
4.4
(5)

As we know, the conceals many secrets, which are gradually revealed.

One of that secret facility is called Micom Manager, and with that special functionality, we can activate the rearview camera and its guidelines, the TMC and the AHA and also we can do and audio tests. In the versions mounted on Renault, it is also possible to manage the ECO mode

Dacia Renault Multiplexer

(On some models of Dacia, is missing a multiplexer that has not provided the connection with the control unit, but on the second hand market is available for buying for around 50$).

But now let’s see how to get there:

  • Format a USB stick like “FAT32”
  • Open the USB stick
  • DOWNLOAD LINK HERE after BEER DONATION🍻 with password: 750078
  • Extract them (not open directly) and copy directly in the main folder.

The structured files should be like this:

  1. MN1 1.x.x-4.x.x: mcmtest_activate.ini (menu Micom+ WinCE)
  2. MN2 5.x.x – 8.x.x: mcmtest_activate.ini ( menu Micom+ WinCE ), mcmtest_activate_4nng.ini MENU MICOM)
  3. MN2 from 9.x.x: mcmtest_activate_4medianav.ini (Micom + WinCE), mcmtest_activate_4nng.ini (only MICOM)
  4. MN3 de la 1.0.x.x: mcmtest_activate.ini ( complete menu MICOM )
  • Load the USB stick in the main slot from Media Nav
  • Startup the navigation EVOLUTION Contact, turn on, volume +, volume – and click empty USB for MEDIANAV or go to Settings → System → System Version [PAGE 2]) for MEDIANAV EVOLUTION
  • Now you need to press in sequence bellow 1-5 areas
Dacia Renault points of touch for micom manager activation on MEDIANAVEVOLUTION

Once done, a new screen will appear, entitled “Test Mode”

At this point we will have to follow these steps:

For version 4.x.x:

  • Type 8005
  • Press OK
  • Delete with the right button
  • Type 3638
  • Press OK
  • Type 1111[Engineering Mode]
  • Press OK

For version 5.x.x-8.x.x:

  • Type 0362
  • Press OK
  • Delete with the right button
  • Type 3748
  • Press OK
  • Type 1111 [Engineering Mode]
  • Press OK

For version 9.x.x

The access codes to the Micom Manager for the new versions 9.1.1 and 9.1.3 are the following:

  • Type 2383
  • Press OK
  • Delete with the right button
  • Type 3748
  • Press OK
  • Type 1111 [Engineering Mode]
  • Press OK

Update!! For version 1.0.xx.x

Vers.1.0.13.1.366_r35:

  • Type 8457
  • Press OK
  • Delete with the right button
  • Type 7777
  • Press OK
  • Type 5031 (PASS version)

Vers.1.0.13.1.366_r36:

  • Type 2895
  • Press OK
  • Delete with the right button
  • Type 5751
  • Press OK
  • Type 9895 (PASS version)

Vers.1.0.13.1.366_r39:

  • Type 6835
  • Press OK
  • Delete with the right button
  • Type 9377
  • Press OK
  • Type 5822 (PASS version)

Vers.1.0.13.2.368_r49:

  • Type 4620
  • Press OK
  • Delete with the right button
  • Type 0688
  • Press OK
  • Type 2047 (PASS version)

Vers. 1.0.13.3.369_r60 + 1.1.13.3.0821:

  • Type 9777
  • Press OK
  • Delete with the right button
  • Type 1757
  • Press OK
  • Type 7817(PASS version)

For version 2.x.x.x KWID or TRIBER CARS:

VERS 2.0.9.9.464_r23:

  • Type 9133
  • Press OK
  • Delete with the right button
  • Type 3992
  • Press OK

For version 3.x.x.x KWID or TRIBER CARS:

VERS 3.0.9.2

  • Type 9973
  • Press OK
  • Delete with the right button
  • Type 6241
  • Press OK
  • Type 9391 [Engineering Mode]

Or TRY Quick launch of the MicomManager configuration screen (only not safe mode)
Press 10 times in a row on the area shown in the picture at number 3
And you will immediately enter MicomManager without entering any codes

Related Post
  1. MEDIA NAV MN1 4.1.x + MN2 9.1.x or MN3 1.0.13.x DOWNGRADE or RESTORE to factory data

    Because there are alot of modifications available on my blog about all the versions of…

  2. Change the BOOT IMAGE on your MEDIANAV MN1 + MN2 + MN3

    If you are tired also about the entering logo image of your car that is…

  3. How to Restore MediaNav MN3(1.0.1.x),MN2(9.1.x) or MN1(4.1.x) device configuration (fix “Connect diag tool” error) after pushing Clear virgin by DDT4all

    How to Restore MediaNav MN3 device configuration (fix "Connect diag tool" error) after pushing Clear…

Now the Micom Manager is opened. To access the complete configuration screen press the “MICOM TEST” button.

MICOM TEST activation Dacia RENAULT

At this point, we need to be aware of what we are going to click, because we could do damage that is difficult (or at least very cumbersome) to remedy. 

For ease of reading, I will describe only the main 21 most important keys in row order, from 1 to 21.

Medianav Evolution MN2 Micom Manager default settings

ATTENTION: Don’t touch ever button “Virgin / Clear Virgin / ClrCnf. ” because is resetting your device.

  1. Guide line reversing camera
  2. Temperature display (off / ° C / ° F)
  3. ECO mode (deactive / active)
  4. AHA function (On / Off)
  5. GPS / Glonass
  6. Reversing radar: Sound (SND) + template (HMI Off / HMI R / HMI-FR) + SPK-FR ??
  7. TMC function (On / Off)
  8. Ignition type of the MN: ON (key on accessory: the station displays the time, engine on: the station displays the menu if presence of the BIC); AC (key on accessory: the station displays the menu)
  9. Color of the interface (M1-> renault; M0-> dacia)
  10. Activate “Road” mode, 4×4 screen (inclination, vehicle orientation) if in Dacia mode.
  11. Automatic transmission (ISR) or manual transmission (BVM) ??
  12. New emergency call function when airbags are triggered ??
  13. Choice of boot logo (at startup): for the choice to be effective, after clicking the left and right arrows, click on the button with the name of the selected logo, then restart MediaNav.
  14. Starting the remote engine ??
  15. Activation of the reversing camera (off / RVC) ?? + n ° 21 (?)
  16. Steering Wheel Remote Control: steering wheel remote control
  17. Push to talk: button on the steering wheel for voice commands
  18. Speaker (SPK) and tweeter (TWR) front (front) and rear (rear)
  19. Loudness
  20. Activation of the BOSE function (brand amplifier required)
  21. $ 17 single camera; $ 18 multi-view camera ??

Some functions require additional interfaces (BIC case for example).

At the end of the 6th line, 2 RVC and MVC buttons (necessary to activate the camera in version 8 and +?)
To change the logo, after having chosen, it is necessary to validate by a support.

for the old Medianav 4.xx MN1 the settings menu is looking as:

Medianav 4.x.x MN1 MICON Manager default settings

UPDATE !! For the new Medianav Evo II 2019 we have :

Normal EUROPE DEFAULT settings for MICOM MANAGER MAPS settings
Medianav EVO II Android Play 1.0.13.x.x
  1. Hard reset: CHANGES CHANGES
  2. Make virgin: ATTENTION! DO NOT TOUCH!
  3. TMC: INFO TRAFFIC (On Off)
  4. COL M0: GRAPHIC INTERFACE: M0-DACIA M1-RENAULT
  5. SND: REVERSE SENSORS (On Off)
  6. DAB: DAB SOURCE SELECTION DAB +
  7. $ 17-HJD_RVC: REVERSE CAMERA
  8. CP: CARPLAY (On Off)
  9. AA: ANDROID AUTO (On Off)
  10. SIRI: SIRI (On / Off)
  11. $ 00 DACIA: BOOT LOGO
  12. ADAC: activation cdb km (On Off) ???
  13. TEMP * C: TEMPERATURE (On / Off)
  14. AIR Active: AUTOMATIC AIR CONDITIONER (On / Off)
  15. ENG BVM: AUTOMATIC MANUAL CHANGE
  16. ECO: ECO (On Off)
  17. LDNS: LOUDNESS (On Off)
  18. MW On-LW On: MEDIUM WAVE LONG (On Off)
  19. ECALL Off: EMERGENCY CALL
  20. SWRC 4: STEERING WHEEL CONTROLS SETTINGS.
  21. DAB: DAB (On Off)
  22. RVC or MVC: REAR CAMERA MULTI VIEW CAMERA (On Off)
  23. : GPS (On Off)
  24. SPK_R + TWR_F + TWR_R: ANT SPEAKER ANT E POST (On Off)
  25. PTT: STEERING VOCAL CONTROL
  26. 4WD: INFO 4X4 (On-Off)
  27. RES: Starting motor remotely ??? – For Russia maybe
  28. AHA: APPLICATION TO LISTEN TO MUSIC ONLINE FROM SMARTPHONE (On Off)
  29. BOSE: BOSE AMPLIFICATION “where provided” (On Off)
  30. WAKE: alarm or starting when unblock
  31. The commands with an asterisk are to be considered unknown.

If you need all the functionalities, please visit another article on my blog with all the buttons explained:

https://lisandru.eu/movies/micom-manager-hidden-settings-with-all-functionalities-explained-for-media-nav-dacia-renault.html

After the modifications, you need to reset the navigation by the pushing of the first button: DSI_Config ( & MN2) or  Hard Reset (MN3)

I hope that this helps you and now you are a happy little hacker that modified your navigation as you need.

Don’t forget to say thanks in comments and share with your friends the link!

How useful was this post?

Should read also:
activate rear view camer and rear speaker in medianavalgerieaudiobluetoothbricocalidadcapturcartografiacliodaciadustereasyevolutionexplicaciónfacilgpsguiakwid rear speakerlodgyloudnessmedi@skinmedianavmedianav 4.0.6 unlockmejoramicommicommanagernavegadorpretenderpt01radiorenaultreviewrlinksanderosonidosubwofersurtexttutotutorialunlock rear view camera option in medianav renault kwid
Lisandru YBF: Senior Engineer & Smart Programmer Passion in Engineering, Scripting, ProgrammingPhotography,Youtube, Blogging. EVERYTHING WHEN YOU VISIT MY BLOG: LISANDRU.EU SUPPORT and GUIDES for: MEDIA NAV SKINS, SOFTWARES, VIDEO PLAYER, NAVIGATION MAPS, IGO HERE + TOM TOM DUAL NAVI, NAVITEL, SEVEN WAY Update for 2020 Q2 MAPS EUROPE + WORLD AVAILABLE NOW !

View Comments (62)

  • Good day thanks for the information on the medianav can you supply the full info to access the windows win6.0.2 so I can access the
    Ecu set up and remove the restriction my Renault service center has set on my 67 plate capture 1.5 dci your information on the ecu screen works fine but I think I need an extra file on my USB stick to access win ecu set up screen. Midianav get 9.1.x if you have the reset info for the ecu screen functions I would be most grateful for a copy. Kind regards k.p

  • merci pour tout ce que vous faite,je voudrais juste savoir comment retirer les restrictions du medianav 1.0.13.2 surtout pour continuer a lire des videos en roulant je vous serais tres reconnaissant merci d’avance.

  • hi there, i am trying to download the file and extract it however its not allowing me to extract as there is some error windows 10 is giving me. can you please help with another file perhaps.

  • hi there, i did all the steps for media nav 9.1.3 however the micom settings is not there its just faded and unable to click on it.

    • Hello Abdullah, This is the effect of not puting the 2 files on the USB stick: mcmtest_activate.ini + mcmtest_activate_4medianav.ini (STEP 3 from article → Download the files from the link, extract them and copy directly in the main folder.). You need to download the file from article, extract it with password: lisandru.eu and then copy on the formated as FAT32 USB stick. After that you will do the next spes and it will work correctly.

  • Hello,
    Thanks for all explanations. Can you tell me if exist any possibility on MediaNav 1.0.13.2 to keep playing videos when I drive ?
    Thank you!

  • anybody know if there is a way to reduce the mic level from the car microphone ?
    i ask because mine has a fault where my handsfree works in that if connects with bluetooth, i can dial/answer calls, i can hear perfectly the other end of the call received. but by audio is getting feedback and ends up in a loop where it ramps up the gain, gets feedback and reduces it down and starts again, so it sounds like it just clicks to the other end every 2 seconds

  • Hi The password you provided dosn't work for me, it is reported that the password is wrong and the files are empty when extracted

    • Hello mr. PERA, Just donwload the file, extract it by inserting the pass: lisandru.eu .Don't open it because this is the reason for not seeing the files. Put the files on the usb and should work after that.

  • Hello. Thanks for the excellent material. Unfortunately I can’t even enter in test mode. Although I’pretty sure I touched the version screen in the right order and places. Tried so many times. With and without a pendrive with the corresponding file. It’s a evolution with 1.0.13
    Can you possible help me? Any idea?

    • It's impossible to not succeed. First you need to put the 3 files:mcmtest_activate_4nng.ini, mcmtest_activate_4medianav.ini, mcmtest_activate_4nng.ini on usb fat32 formatted, then version (5 touch points) and finally you go to miconmanager.

      • Thanks a lot for your answer. Indeed I misunderstood, ans tried only with one file. I'll give it another try and let you know. Thanks!!! (Those 3 files for version 1.0.13.1, right?)

        • Hello. Ok, It did work. :) thanks a lot.

          I managed to access the settings and alter them, but I couldn't achieve my principal goal that was to enable navigation.

          Here in brasil, latest version of MN cames with the navigation not enabled. I tried some values at map setting and in GPS button, but couldn't get the nav enabled.

          The GPS TEST from first screen after codes (the one with the micom test button), shows all gps data working normally. Have any idea how could I enable navigation?
          Thanks

          • Yes. On the third row you will sew bellow hmi something like no map. There just choose something else. After this you need to reset it and the navigation button will appear.

      • Hallo die erste und dritte datei sind doch die selben bei mir bleibt das
        fenster micom test hell grau
        weiß jemand woran das liegt
        Kannst du mir möglicherweise helfen? Irgendeine Idee?

        ENG: Hello the first and third files are the same for me it remains
        window micom test light gray
        Does anyone know why this is
        Can you possibly help me? Any idea?

        • If you are putting the 3 files inside of directly USB is impossible to not work. Keep in mind that before inserting the codes you need to have already inserted the usb with that 3 files. Wait for your feedback.

    • Yes. The first button but you need to be very gentil to not push the virgin ( the 2nd one) because you clear your medianav and is not so simple to come back. You can use also long pushing the power.

Leave a Comment
Related Post
  1. MN3 DUSTER RED template for 1.0.13.3 MEDIANAV EVO 2 DACIA and RENAULT
  2. MN3 BENRIE CLEAN or BLACK AND WHITE IOS BASED 1.0.13.3 SKIN for DACIA 2020 and RENAULT
  3. MEDIA NAV MN1 4.1.x + MN2 9.1.x or MN3 1.0.13.x DOWNGRADE or RESTORE to factory data
Leave a Comment

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.