I write you in the past about upgrade the maps on MN3 EVO 2 1.0.13.x at:


But in this time I received a lot of requests of how to restore and fix the because the it wasn’t made correctly.

So for that I present you a list with the most usefull scripts that you need to use to revive your navi system.

We will start with the preparing phase → PC WINDOWS PART

  • Take a  stick 2.0 (recommended) or 3.0 (recommended with led indicator just for see when is finished)
  • Format it by “FAT32“.
  • Choose the right script that describes your action from here:

↑ COPY directly to the main usb folder the file: autorun.sh + extra folder if the archive contains it.

MEDIANAV MN3 ANDROID 1.0.13.x IOS CLEAN
MEDIANAV MN3 ANDROID 1.0.13.x NAVI ICON ACTIVATED

NAVI activation on 1.0.13.3 [LINUX BASED]

– unzip the autorun_bouton_navi_10133 archive on the key
– put the key in the MN and turn it on
a log file must have been created
See the File: autorun_bouton_navi_10133.zip

1st step: backup of the Navi partition to be done only once


– decompress the autorun_sauave_navi archive on the key
– put the key in the MN and turn it on
an nng2 folder to keep will be created on the key with all the files. It takes around several ten minutes to copy everything (depends of your medianav files) + generates a log
DOWNLOAD file script after the beer donation 🍻

Restore partition / navi from step 1

– unzip the archive restauration_navi.rar on the key after having done step 1
put the key in the MN and turn it on
a log file restoration_navi.txt must have been created
See the File: restauration_navi.rar

2nd step: modification of the navi partition

we can only install licenses which do not refer to DEMs
→ unzip the autorun_ecrit_navi archive on the key
→ complete the nng folder on your usb key with the new .fbl maps in / nng / content / map
→ complete the nng folder on your usb key with the new poi in / nng / content / poi
→ complete the nng folder on your usb key with the new .3dc and .3dl in / nng / content / building

→ put the key in the MN and turn
it on it takes several minutes to copy everything depending on the size of the files to be copied
a log file Ecrit_Navi.txt must have been created
See the File: autorun-ecrit_navi.zip

3rd step: set up the speed cameras

– unzip the autorun_speedcam archive on the key
– complete the nng folder on your usb key with the new speed cameras en.txt in / nng / content / speedcam
– put the key in the MN and turn it on
a log file Written_Speedcam.txt must have been created
See the File: Autorun_speedcam.zip

RESULT:

MEDIANAV MAPS 2020 UPDATE
MEDIANAV MAPS 2020 UPDATE

Installation / uninstallation of Carbon for linux

here is a light version of carbon without Ipt
For the installation:
– unzip the installation archive on the fat32 formatted key
– put the key in the MN and turn it on
a log file Ecrit_carbone.txt must have been created
See File: installation_carbone.rar

For uninstallation
– decompress the uninstallation archive on the fat32 formatted key
– put the key in the MN and turn it on
a desinstallation_carbone.txt log file had to be created
See the File: desinstallation_carbone.rar

Move the content folder to the usb key to alleviate the space problems
1 unzip the archive
2 complete the content folder on the key
3 place the key, wait for the reboot
4 keep the sys file .txt.save to use the Medianav content folder

repeat steps 1 to 3 if you are using a new View File key
:autorun_content_navi.zip

Restore the content folder to its initial place on the MN

1 uncompresses the archive
2 replace the sys.txt.save file if you have a special configuration
3 place the key, wait for the reboot
See the File: autorun_bavn_restore_content.zip

on can also place the sys.txt file in a logfiles_bavn folder, it will be copied, it will then be necessary to restart for it to be active, remember to remove the logfiles_bavn folder to avoid copying the many logs on the key.

Troubleshooting

Diagnostic

– unzip the archive on the fat32 formatted key
– put the key in the MN and turn it on
a logDiag_Navi.txt file must have been created, please pass it to me to try to see the problem
See the File: autorun-diag_navi.zip

Save and delete the save folder

– decompress the archive on the fat32 formatted key
– put the key in the MN and turn it on
– wait for the copy and restart the medianav
– a folder for saving the nng_rw parameters is on the usb key, it should be kept
See the File: autorun_delete_save.zip

Erase the contents of the / navi folder

– decompress the archive on the fat32 formatted key
– put the key in the MN and turn it on
– wait for the copy and restart the medianav
See the File:delete_navi.rar

Restore POIs / favorites from the save folder

– unzip the archive on the key keeping the nng_rw folder from your previous backup
– put the key in the MN and turn it o
– wait for the copy and restart the medianav
See the File : autorun_restor_poi_save.zip

Restore entire NAVI

– unzip the archive on the key keeping the nng_rw folder from your previous backup
– put the key in the MN and turn it o
– wait for the copy and restart the medianav
See the FOLDER :

RESTORE NAVI /  STEP 0 – DELETE NAVI

ACTIVATION NAVI NNG ON MN3 1.0.13.X

RESTORE NAVI /  STEP 1- ACTIVATION NAVI

+ RESTORE DDT PARAMETERS

Notes:

→ To restart hot from the menu, click on the Nav icon the first time, wait, and click a second time on the same icon. Navigation should start again.

→ To restart it HARDLY the medianav totally just STOP the medianav by long pushing POWER BUTTON and then the navi should start it up

→ If nothing change try with usb inside to hard restart it as previous explained and the upgrade will be done 😉

→ If you have the 1.0.13.1 or 1.0.13.2 you can make also and upgrade and can fix you problem. If not the only solution are the scripts used for different aproaches.

↑Important: Don’t forget to not stop the engine or ignition on the updating process !↑

Attention: Please make sure to update only the clean versions of Medianav MN3 ANDROID (1.x.xx.x) and remember also:

“THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. “

Now everything is updated. If not? Check the bellow error solutions in order to solve the issues or just contact me by telegram: Media Nav & DDT4ALL DACIA & RENAULT HACKS or by facebook: LISANDRUYBFor by the link.


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.