0
(0)

If the maps are outdated, your navigation system may frequently provide you with improper instructions, that can generate a lot of dangerous situations. Updated navigation helps safe driving by preparing for unexpected situations arising from changes in the road network. Anyone can encounter annoying mistakes in route planning that are often thought to be the fault of the navigation system. Actually, the most common reason for errors in route calculation is due to the outdated maps.

UPDATE MEDIANAV MN3 ANDROID TOOLS STRUCTURE → Link download donation after beers🍻

By using updated maps the system saves you time by optimal route planning. You may also reduce the average fuel consumption of your vehicle.

2020 HERE + TOMTOM MAPS UPDATED

Not only the road network changes but also the database of available places of interest (POI). It includes a list of gas stations, ATMs, pharmacies, restaurants, accommodation and many other places that you may need while traveling.

FIRST STEP – CHECK THE VERSION OF MEDIANAV

DACIA Medianav Evolution v2 Software
(2019→ ):

• Version 1.0.15.1
• Version 1.0.13.3
• Version 1.0.13.2
• Version 1.0.13.1
• Version 1.0.12.8

RENAULT QWID TRIBERMedianav Evolution v2 Software
(2019→ ):

• Version 1.0.13.x
• Version 1.0.15.x
• Version 3.0.10.1
• Version 3.0.9.9
• Version 2.0.9.9

Then we will start with activating the navi where is the case from left side

MEDIANAV MN3 → Link download donation after beers🍻

This technique is the only way safest update way because the chances to broke something are the smallest.

If you are confident let’s start.

PC WINDOWS PART

Choose a map that you need from the red map points (If you cannot see them please scroll a little & wait 5s) :

  • FULL EUROPE (2020 Q4 MAPS), FULL WORLD(2020 Q4 MAPS) or different specific country update files
  • Download the tool structure from the link (PASSWORD available after the beer donation 🍻 ).
    • You will have 3 folders: 1- BACKUP, 2- MAPS & POI, 3- SPEEDCAMS
  • You will do the update in 3 steps:
    1. BACKUP PHASE
    2. UPDATE NAVI FILE + LICENSE + MAP & POI
    3. UPDATE SPEEDCAMS
      ! After each step you need to modify the structure and the autorun.sh files!
  • Now you need a USB stick 2.0 (recommended) or 3.0.
  • Format it by “FAT32“.
  • Paste directly on the main folder the files that you copied before.

1. BACKUP PHASE:

← COPY directly to the main usb the 1 folder with 1file: autorun.sh

Car NAVI Part:

  • Start the engine on.
STOP the medianav by long pushing POWER BUTTON + Insert the USB stick in the input slot from the media nav

or

Insert the USB stick in the input slot from the media nav | RENAULT KWID USB ports
Now the medianav will start, read the usb, say that is nothing inside.
  • Wait for some minutes (10 minutes it will be ok)
  • Take out the usb stick
  • Put again inside of LAPTOP or PC and you will find some log files and 1 folder with the content of the maps.

2. INSTALL NAVI CONTENT+LICENSE+ MAPS+ POI PHASE:

MAP NNG + MAPS + POI UPDATE MEDIANAV ANDROID UPDATE

← COPY directly to the main usb the 2 folders:

* autorun_bavn folder with autorun.sh file

* NNG folder with content folder → map folder → *.fbl
→ poi folder → *.poi

license folder with *.lyc

nngnavi app

SCHEMATIC MORE EASY FOR THE STEP 2 UPDATE NAVI CONTENT+LICENSE+ MAPS+ POI FILES

Car NAVI Part:

  • Start the engine on.
  • STOP the medianav by long pushing POWER BUTTON
  • Insert the USB stick in the input slot from the media nav.
  • Now the medianav will start, read the USB, say that is nothing inside.
  • Wait for some minutes (5 minutes it will be ok)
  • Take out the USB stick
  • Put again inside of LAPTOP or PC and you will find some log files and the results inside.
  • Now you need to restart again the medianav by pushing the power button until is shutdown
  • Power ON and start the NAVI. You will see that the maps are there like at the beginning of the article.

3. SPEEDCAMS CONTENT PHASE:

← COPY directly to the main usb the 2 folders:

* autorun_bavn folder with autorun.sh file

* NNG folder with content folder → speedcam folder → *.spc
+sys.txt

SCHEMATIC MORE EASY FOR THE STEP 3 UPDATE NAVI SPEEDCAMS FILES

Car NAVI Part:

  • Start the engine on.
  • STOP the medianav by long pushing POWER BUTTON
  • Insert the USB stick in the input slot from the media nav.
  • Now the medianav will start, read the usb, say that is nothing inside.
  • Wait for some minutes (5 minutes it will be ok)
  • Take out the usb stick
  • Put again inside of LAPTOP or PC and you will find some log files and the results inside.
  • Now you need to restart again the medianav by pushing the power button until is shutdown
  • Power ON and start the NAVI. You will see that the maps are there like at the begining of the article.

↑Important: Don’t forget to not stop the engine !↑

Attention: Please make sure to update only the clean versions of Medianav MN3 ANDROID versions (1.x.xx.x) and remember also:

“THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. “

Now everything is updated. If not? Check the bellow error solutions in order to solve the issues or just contact me by telegram: Media Nav & DDT4ALL DACIA & RENAULT HACKS or by facebook: LISANDRUYBFor by the link .

IF you get some NAVI problems after this you should use follow this guide of how to restore the NAVI to be 100% functionally again:

AUTORUN dot SH : ALL THE PERFECT SCRIPTS FOR RESTORING or UPGRADING THE MN3 EVO 2 — Lisandru Blog

Enjoy your new MEDIANAV NAVIGATION MAPs last updated version.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

One Reply to “KEEP UPDATED your MEDIANAV MN3 MAPS DACIA AND RENAULT KWID TRIBER ANDROID NAVIGATION”

  1. Hi,
    I tried this procedure,.

    step 1 back-up worked fine.

    step 2. I did it exactly as described and it seem to complete correctly.
    after restart of medianav the accept button stayed gray, so navigation did not start.

    I redid step 2 and after restart i suddenly had the old maps back.

    Situation is now as following:
    Navigation with old maps work fine.
    I cannot get in secret micom mode again because the tapping of the sequence does not work.
    I cannot get a fingerprint anymore for official updates, it fails.
    However when i read the partial fingerprint on the usb stick i can see that the new maps are copied on the medianav.

    Strange situation, please help.
    What did i do wrong?

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.