is an open-source program with a friendly graphical interface. With this program and a CAN network with a cheap ELM327 interface, you can access various control devices and change parameters via the OBD interface. For example, functions can be unlocked that are actually withheld from other models (eg comfort indicators, permanent tacho lighting).  Using the application in nonexpert mode should not be harmful to your vehicle (leave the expert mode button released)
The author declines all responsibility for the bad use of this tool. You are the only responsible. This tool is mainly aimed at CAN ISO_TP network study.

✅DOWNLOAD ℹLINK HERE
 after BEER DONATION  for all the DDT4ALL + DACIA database last tested + PYREN and driver necesarry for USB ELM OBD SCANNER

ATTENTION

The devices discussed in this manual, software, and methods for working with them are not released by the car manufacturer.

The potentially unrestrained use can lead to work interruptions or failure, both individual units and components of the car, as well as the car as a whole, they can also be a reason to reduce the level of vehicle safety and reject the warranty service.

Anyone who chooses to do experiments on their car needs to understand all the risks and only take them on board.

I am not responsible for any damage caused to users of this manual and third parties.

And now if you are ok, we can start with basic changes that we will cover in this article:

Preliminary operations

What will we need, first of all?

  •  An OBD2 interface ( ELM327 V1.5 mandatory with PIC 18F25K80) compatible, whether it is USB, Bluetooth or Wi-Fi, you can read about the versions here;
    • The correct driver for the interface in case of USB can be Prolific USB – SERIAL and can be download from the ℹLINK
  •  A laptop PC with Windows (tested with 7 and 10);
  •  The DDT4ALL software, which you will find(version 5.3.5 updated to 20.01.2019 by Zmiterm) or the official owner Cedricp GitHub release ✅DOWNLOAD ℹLINK HERE for all the DDT4ALL + database last tested + PYREN and driver necessary for USB ELM OBD SCANNER
  •  A minimum of computer skills, otherwise it is better to leave it alone …

Once the program is downloaded we need to install it in our PC as we do for any software, then double click on the icon, click on the English language, click again on next, next, at this point we check the box “create an icon on the desktop and then on go ahead, and then install, then finish Now we can get familiar with DDT4ALL trying to modify the various parameters in the “DEMO” version (so we will not change anything and we can do it even without attaching the OBD2 to the machine). Click on the icon that we find on the desktop after its installation. A white window will open that we will leave alone and shortly after another small window with the various connection selection options, we just click at the bottom and center of the box on the word “Demo” (Figure 1).

After requesting some updates on a Capture and some test about, I want to share with you some minor improvements in the settings of the car.

1. AUTOMATIC DOOR LOCK

First activated door auto-closing. This is done simply by holding the central locking button for 5 seconds. An inscription appears on the tidy, something like “auto-closing doors activated.”

By default, if you opened the central lock with a key, but after that did not open any of the doors for 2 minutes, then TSEBKS will close the central lock automatically.

AUTORELOCK CAPTUR ACTIVATION

To change this parameter, select our found UCH block of the form “T4_VS-BCM_DDT2000_SW15_1”. After that, below we look for the screen with the settings of the central locking system “Doorlock” and go to its configuration. In the right large frame we find the parameters “AUTO_RELOCK_TIMEOUT_CF (min)” + “DOOR_WARNING _SPEED_TRESH_TP (km/h)” set to 20km/h and in the expert mode (it blocks writing to memory by negligence) we change its value to the desired one in minutes or turn it off altogether by setting the value to “0”, press the button for sending the command “Send” …


2 Oil pressure control was turned on not at 2000 rpm (as it comes from the factory), but from 600 rpm:

Oil pressure control DDT4ALL RENAULT CAPTURE

3. The “Driving style indicator” is activated – an indicator of driving efficiency (green / yellow / orange) + DAY BACKLIGHTS (all time lighs on background)

To be able to parameterize the dashboard, we find in the DDT4ALL database corresponding to our car “CLUSTER_x98_X87____v8.02”. If you expand the frame window to the right, you can make sure that this scenario is compatible with your car. By double clicking on “CLUSTER_x98_X87____v8.02” add it from the database to the list of our scanned blocks. In the screen selection frame, we find “CONFIG GENERALE 2” after we see a large list of dashboard parameters. ECONOMETER should be automatic.

To turn on the daytime illumination of the dashboard in expert mode, change the value of the parameter “Day_Backlights_Present” to “With” and press the button “Background light”. To disable the warning about unfastened seat belt in expert mode, change the value of the “Front_Sbr_Inhibition” parameter to “De-activated” and press the “Belt signal” button. After all the manipulations, do not forget to apply the new parameters by pressing “Soft reset” – the tidy will reboot and they will take effect.

YELLOW ECONOMETRIC LIGHT – need to change gear RENAULT CAPTUR DDT4ALL ACTIVATIONS

4. Turned on the clock (it was off) and the outside temperature (there was only a warning)

UPD – a photo where all changes are visible:
Temperature and time on BC

To be able to parameterize the dashboard, we find in the DDT4ALL database corresponding to our car “CLUSTER_x98_X87____v8.02”. If you expand the frame window to the right, you can make sure that this scenario is compatible with your car. By double clicking on “CLUSTER_x98_X87____v8.02” add it from the database to the list of our scanned blocks. In the screen selection frame, we find “CONFIG GENERALE 2” after we see a large list of dashboard parameters.

RENAULT CAPTUR DDT4ALL ACTIVATIONS

To activate the on-board computer through DDT4ALL tools in expert mode, change the value of the “Trip_Computer_Type” parameter to “volume / mileage” and press the “ADAC” button. To activate the overspeed warning in expert mode, change the value of the “Overspeed_Warning_Present” parameter to “With overspeed warning” and press the “OVERSPEED” button. To turn off the prompts for gear shifting in the expert mode, change the value of the parameter “Freeshift_Management_Present” to “Without Freeshift” and press the button “Freeshift”. To activate the clock on the dashboard in expert mode, change the value of the “Clock_Displayed” parameter to “Clock_Displayed” and press the “CLOCK” button. To activate the outside temperature sensor in expert mode, change the value of the “External_Temperature_Present” parameter to “External Temp.

After all the manipulations, do not forget to apply the new parameters – the tidy will reboot and they will take effect. I strongly recommend that before starting work, just in case, remember / write down the factory parameters and make changes one by one with a reboot, and not all in bulk. If someone needs it, then you can make other changes on this screen.

5. Polite signalization

We select our found UCH unit of the form “T4_VS-BCM_DDT2000_SW15_1”. After that, below we look for the screen with the settings for the “Flashers” turn signals and go to its configuration. The parameter responsible for this mode is called “T_PULSE_CF” and in the disabled state has the value “false”.
To activate it in the (WRITE) column, you need to change its value to “true”, then activate the expert mode (it blocks writing to memory by negligence) and press the “Send” command button. All – the polite turn signals are activated.

Polite signalization RENAULT CAPTUR DDT4ALL ACTIVATIONS

6. Turned OFF the AUTOMATIC REAR WASHER

For a civilized non-artisanal shutdown of the automatic rear wiper, we select our found UCH unit of the “T4_VS-BCM_DDT2000_SW15_1” type. Then below we look for the screen with the settings for the rear wiper “Rear Wiper” and go into its configuration. In the right large frame, we observe three columns: the first is the name of the parameter, the second is the current value of the parameters in the block memory (READ), the third is the value that can be written to the memory (WRITE, not visible in this photo). If you have errors in the (READ) column, you need to forcibly read the current parameters by clicking the green update icon at the top of the program window. The parameter responsible for the automatic mode of the rear wiper “ℹLINKED_WITH_REVERSE_CF” is active by default and has the value “true”.

DISABLE THE AUTOMATIC REAR WASHER RENAULT CAPTUR DDT4ALL deACTIVATIONS

7. Turned OFF the START & STOP

For a civilized non-artisanal shutdown of the automatic rear wiper, we select our found UCH unit of the “T4_VS-BCM_DDT2000_SW15_3” type. Then below we look for the screen with the settings for “EMM_ALTERNATOR_AMAMGEMENT” and go into its configuration. In the right large frame, we observe three columns: the first is the name of the parameter, the second is the current value of the parameters in the block memory (READ), the third is the value that can be written to the memory (WRITE, not visible in this photo). If you have errors in the (READ) column, you need to forcibly read the current parameters by clicking the green update icon at the top of the program window. The parameter responsible for the automatic mode of the start and stop is “C_B_ START AND STOP INHIBIT” is “0” by default and need to be with the value “1”.

DISABLE THE START & STOP RENAULT CAPTUR DDT4ALL ACTIVATIONS

If you want some additional activations please read also my complete DACIA DUSTER II HJD list:

3 Replies to “Renault Captur DDT4ALL ACTIVATIONS”

  1. how do we enable the dynamic audi-like ‘Floating Indicators’ which are standardly equipped on most 2018 capturs but are disabled in most countries because of regulations?

  2. hello i have a renault clio 4 9.0 tce and i was messing with ddt4all to activate some hidden functions, however, a short time ago i noticed that the green (middle light) and blue (maximum beam) lights do not appear. .where can I replace them again on ddt4all ??

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.